Industrial Tools

6''x1/2'' knotted wire wheel brush

Code 45003106

The Tramontina PRO Brush line is used for removing sharp edges, burs, rust, paint, and welding residues, offering a solution for steel, wood, tube, and rubber finishing.

Product features

Main Functions and Benefits Hardened special steel wire.
0,5 mm wire diameter.
22,23 mm arbor hole.
24 tress.
EN 1083.
Used for preparing and cleaning welding seams on assembling and maintenance pipe lines.
Used on 4.1/2" angle grinders.
The tools are subjected to application tests to ensure their mechanical resistance during constant use.
Tools are produced and tested according to specific standards.
Recommendations for Use Wear safety glasses, gloves and others safety equipments according to the job.
Store the brushes in a safe place protected against humidity, condensation, heat, water, acids, vapors and others aggressive liquids that can cause oxidization in the metal parts and filaments.
Pay attention with the tip of the wires, it can cause injuries to the user.
Never use damaged brushes.
Do not make any changes to the construction of the brush.
Use brushes only in suitable machines and power tools.
Never exceed the maximum rotation speed of the brushes.
As much as possible, put your body in a safe position in order to avoid being hit by the projected particles during the brushing process.
Do not wear loose clothes.
Long hair should be protected by a hairnet and helmet.
Avoid excessive brush pressure against the work piece. This reduces the efficiency of the brush and could case premature failure or damages to the machine.
Protect your hands from the rotating parts during brushing process.
Store in a clean and dry place.
Weight 0,50 kg
Warranty Full warranty against manufacturing defects.
Dimensões
  • A: 150.0 mm
  • B: 22.2 mm
  • C: 13.0 mm